Switch ST13L5S5V31BEJ4J9322

Switch ST13L5S5V31BEJ4J9322

UNSEALED MINIATURE ROCKER SWITCH

MATERIALS

• Contacts: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry circuit models.
• Actuator: J1 & J2 - Glass filled polyester. J3 & J4 - Nylon or acetal
• Bushing: Nickel plated brass
• Strap: Stainless steel
• Case: Melamine phenolic, color red
• Terminal seal: Epoxy (optional)
• Support bracket: Brass or steel, tin plated
• Spring mounting bracket: Stainless steel
• Bezel: Nylon. Available in black, red & white. Consult factory for other colors.
• Hardware: See 'Miscellaneous' section.
• LED: Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous
• forward current: 15 mA for red, 30 mA for green & 20 mA for yellow.
• Red is standard. Yellow & green are optional. Specifications are subject to
• change without notice - consult factory.

SPECIFICATIONS

• Contact ratings (resistive loads): (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC.
• (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max.
• UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E66367. CSA models - coin silver: same ratings as UL models. CSA file no. LR54592-1.
• Initial contact resistance: 3 milliohms max. at 3 VDC, 0.1 Amp.
• Insulation resistance: Greater than 200,000 megohms between terminals & case ground.
• Dielectric strength: Greater than 2000 VAC for 1 minute between terminals & case ground.
• Electrical life (resistive loads): 100,000 cycles min.for ST1-1 & ST2-1. Other models, 40,000 cycles min.
• Operating temperature range: -30°C to +85°C

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

• Completely specified switch models
• Miscellaneous
• 'build your own switch' order format
• Option drawings & information e. Mounting information and panel cut-outs

AGENCY RECOGNITION

UL, & CSA. Marking: Switches ordered by UL model number are supplied with recognition marking. Switches ordered by UL model no. and with '/CSA' added at end of model no. are supplied with both recognized marks.